Europlex 3GS User's Guide download pdf (Page 13)

Full Set

3GS User Guide

User Guide

Full Set

This option will set the entire system. Ensure that all

zones (doors, windows, etc.) which are not on the exit/

entry route are closed.

Exit Sequence

Enter your user code and press FULL. Leave via the exit

route. The buzzer will stop at the end of the exit time

and the system will fully set.

The buzzer will sound during the exit routine. At the end

of the exit time, if all zones are closed, the buzzer will

stop. The system will then become Fully Set if :

1. the exit time expires, or

2. the ‘exit terminator’ button is pressed.

If a zone is still open, the system will wait indefinitely for

a clear condition, then set when the zone is closed.

During the exit period the buzzer will sound with one of

two possible tones, a long beep indicates that all zones

are closed and that the system will set correctly when the

exit time expires; a short beep indicates that one or more

zones are open and the system will not SET until all these

zones have closed.

Multi-Area system configuration

In a multi-area system, Full Set has the effect of setting

all areas plus the Common Area.

Alarm on exit

If the user strays from the exit route a local alarm will be

generated, tripping internal/external bells.

Action to take:

l Return to control panel;

l Select ‘UNSET’ (see “After an Alarm Activation” on

page 9).

l Remove alert messages (see “Accept All Alerts” on

page 10).

l Reselect “Full Set” and exit the premises.

Entry Sequence

When you enter the building, the system will be Fully Set. The entry buzzer sounds and the entry timer

begins. This gives you a specific number of seconds in which to go to the keypad and Unset the system.

Otherwise a full alarm is generated along with the alert message “CODE ENTRY TIMEOUT”. In this case

repeat the Unset procedure to silence the alarm.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

No comments

Europlex 3GS User's Guide Page 13