Europlex 3GS User's Guide download pdf (Page 32)

Change Requirement

This option allows you to decide if a card should also require a PIN code before it will grant access through a door. It

also allows you to change the existing PIN code for the card or create a new one.

Note The user should be aware that the PIN code created using this option will apply to all the cards being passed

at this stage

Once a PIN code requirement has been assigned, you will be prompted to identify the card location.

Change Card Location?

When passing the card, you must establish where the card actually is at the time of passing. The Roll Call and Anti-

Passback functions allow the installer to identify which cards are in use in the system at any given time, and to control

the use of cards within the system. This menu will identify the card as being inside or outside the alarm area when

passed. When all the system cards can be located at any time, they can be tracked and controlled effectively. When

you have assigned the card a location status, press the key to return to the main menu.

Voiding Cards

The Void Cards option is used when you have a set of cards that you want to be removed

from the system.

Voiding a card removes all the card’s settings from the system, from system ID to access/

function/visitor levels.

Exiting the

Setup Cards

Press NO to exit the Setup Cards menu.

The display will show:

If you have a printer connected to the controller serial port, you can now print out the

card settings you have just configured.

Press YES to print and NO to exit the menu.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 49 50

No comments

Europlex 3GS User's Guide Page 32