Europlex 3GS User's Guide download pdf (Page 36)

DIT

IME

OMMANDS

An automatic time command is a programmed command string which instructs the

3GS to execute a function at a pre-set time. For example, the system could be

instructed to automatically Full set the premises at 18:00.

Certain time commands are for installer use only, as indicated below. The other

commands are for Master User use.

This mode is a simplified "time command edit" function which allows the Master

User to modify the TIME at which the action will occur without allowing alteration

of the command.

The new time must be valid (24-hour format) or the procedure will not continue.

Note Enter "24:00" hrs to disable a time command.

After adjustment is made the key should be pressed to program the new

time into the system.

Movement forward and backward through the time strings is provided by the

UNSET and PART keys.

SUNDAY HOUR

Checks for Hour change on Sundays. Installer user only.

LOG DUMP

Sets dial-out variable for system to dial a remote PC/Printer. Installer user only.

AREA 1 10M WARN to AREA 8 10M WARN

Automatic arming commands for Areas 1 to 8.

These commands (one for each block) start a 10-minute warning time (to inform

people that they must leave the building) after which time the relevant area will

arm.

BATTERY TEST

This command sets a time (1 per day) at which an automatic battery test will be

carried out. Installer user only.

FULL SET 10M WARN

Automatic arming command for the full system. Works in the same way as the Area

10-minute Warning but in this case the full system will arm.

Late working time commands

These commands allow for late working on the premises. They will arm the system/

area if the first arming time command is cancelled. These are:

L.W. AREA1 WARN to L.W. AREA32 WARN

L.W. FULL SET WARN

E.g. AREA1 10M WARN may be set to 7pm and the L.W. AREA1 WARN set to

9pm. Normally the first time command would arm the area 1 at 7pm. However, if

the user cancels the first time command in order so that he/she may work late then

the first time command is ignored and the system will be armed by the second

time command at 9pm.

SIA TEST CALL

Sets a communication parameter. Installer use only.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 49 50

Comments to this Manuals

No comments

Europlex 3GS User's Guide Page 36

Comments to this Manuals

Related products and manuals for Numeric keypads Europlex 3GS